RENUE Floor Care
← Back to Janitorial ChemistryFloor protection and gloss
RENUE Floor Finish
A durable, low-odor floor finish engineered for strong initial gloss, heel-mark resistance and responsive maintenance.
RENUE Floor CareRENUE
PurposeFloor protection and gloss
Process fitMulti-coat mop application
SelectionSurface and task validated
Product overview
Built around the maintenance result
RENUE Floor Finish combines a high-density acrylic polymer, non-yellowing alkali-soluble resin, polyethylene wax emulsions and a non-phthalate plasticizer. The balanced formulation dries quickly while building a durable, high-gloss protective film.
The finish is designed to resist detergents and black heel marks and to respond well to both buffing and high-speed burnishing.
Application method
A clear, repeatable starting procedure
- Completely remove the old finish, rinse the floor and allow it to dry.
- Apply a thin-to-moderate coat with a clean finish mop.
- Allow 20–30 minutes of drying time, or until dry to the touch.
- Apply three to five coats, allowing each coat to dry before the next.
Use note: Confirm the current label, TDS and SDS before use. Test compatibility in an inconspicuous area and train operators on dilution, PPE, dwell time, recovery and disposal.
Build the right facility-care process
Share the surface, soil, traffic pattern, equipment and desired result. We’ll help validate the product and procedure.
Start a Consultation