AGC Chemicals
AT2
Amolea AT2
Amolea AT2 is a mixture of Trans-1,2-Dichloroethylene, HFE-347pc-f (Asahiklin AE-3000), and a fluorinated solvent. It is a non-flammable, non-ozone depleting solvent.
AGC Chemicals Americas AMOLEA™ AT2 is a next-generation fluorinated precision cleaning solvent. This solvent has excellent solvency with a wide variety of press oils, cutting oils, silicone oils , refrigerant oils, greases, asphalt pitches, and fluxes used in the electronics industry.
AMOLEA AT2 has no ozone depletion potential, has less global warming potential than our existing AsahiKlin AE-3000 series products, is non-flammable, and is energy efficient due to its low latent heat of vaporization. AMOLEA AT2 will be marketed as an alternative to 3M Novec products, Chemours Vertrel offerings, n-propyl bromide and trichloroethylene.
Applications:
- Degreasing (cutting oils, press oils, silicone oils), greases, waxes, asphalt pitches
- Defluxing of printed wiring assemblies
- Carrier solvent for silicone oils
- Replacement for n-propyl bromide, trichloroethylene, Dupont™ Vertrel®, & 3M™ Novec™ solvents
Benefits:
- Non-flammable
- Low global warming potential (GWP)
- Zero ozone depletion potential (ODP)
- Excellent thermal, chemical, and hydrolytic stability
- Low surface tension, low viscosity, high liquid density
- Superior drying property
- Recyclable
- Recoverable by simple distillation
- Can be used with ultrasonics
- Excellent compatibility with metals
- No stabilizer additions or monitoring
Physical Properties:
| Property | AT2 |
| Boiling Point | 42C (107.6F) |
| Vapor Pressure (kPA, 25C) | 50 |
| Density (g/cm^3, 25C) | 1.30 |
| Viscosity (cST, 25C) | 0.34 |
| Surface Tension (mN/m) | 18.0 |
| Specific Heat (kJ/kg C) | 1.21 |
| Latent Heat of Vaporization (KJ/kg@boiling point) | 218 |
| Relative Evaporation Rate (Ether=100) | 92 |
| Flash Point (Open/Closed cup) | none |
| Kb Value | 66 |