Genesis Series Cabinet Parts Washers with Roll Away Door
The Genesis series of cabinet parts washers includes two models: the G-2000, with a 27″ diameter turntable, and the G-3000, with a 37″ diameter turntable. Both models are available in mild steel or stainless steel.
These washers are ideal for automotive parts cleaning – brakes, gears, rods, transmissions, etc. – repair/maintenance operations, and general process
One of the hallmark features of the Genesis parts washers is the ROLL-AWAY DOOR, which saves floor space. The doors are center supported and don’t suffer
from the drag problems experienced by doors with outside rollers… hence the LIFETIME GUARANTEE.
The Genesis units have VERTICAL, SEAL-LESS PUMPS. There are no bearings or seals beneath the solution level. The pumps are driven with TEFC motors. The
motors have extended shafts that connect directly to the pump impellers (no couplings.)
Vertical Seals-Less Pumps
The Genesis units have vertical, seal-less pumps. There are no bearings or seals beneath the solution level. The pumps are driven with TEFC motors. The motors
have extended shafts that connect directly to the pump impellers (no couplings).
Lifetime Guarantee against any welds cracking or leaking*
Lifetime Guarantee on the turntable and its sealed bearing assembly
Lifetime Guarantee against the door ever jamming
|Weight Capacity||500 lbs.||1500 lbs.|
|Vertical Pump||3 HP||5 HP|
|Pump Output||60 GPM/45 PSI||100 GPM/50 PSI|
|Tank Size||55 gal||100 gal|
|Heat||6 kW||12 kW|
|Heat-Up Time||1.25 hours||1.25 hours|
|Full Load Amps||49||53|
|Overall Dims||42″w x 49″d x 79″h||56″w x 65″d x 94″h|
|Shipping Weight||800 lbs.||2000 lbs.|
*Warranty void if leaks caused by corrosion