Aquablast Wet Blasting Cabinets
Aquablast 915, 1215, 1515
The process cleans by flow, and not impact, producing a ‘soft’ finish. The water acts as a lubricant, avoiding media impregnation and also extending the life of the blast media. The typical process is as follows:
- The water/media slurry is contained within the wet blasting cabinet sump.
- Delivery of the slurry to the manual blast nozzle is via a glandless polyurethane pump and associated hoses located inside the wet blasting machine.
- Compressed air is added at the blast nozzle to accelerate the slurry and create the cleaning effect.
- After contact with the component, the slurry then drains back into the sump creating a re-circulating system.
- Fine broken down media and other contaminants are fed via an overflow to a sedimentation filter located at the rear of the wet blasting machine.
Standard Features
- Dust free process
- Blast & Degrease
- Cleans by flow
- ‘Soft’ finish appearance
- Longer media life
- 100% stainless steel
- Large side door
- Rubber lining
- Windscreen wiper
- Tungsten Carbide nozzle
- Fitted with decant valve to remove water with minimal media loss
Available Options
- Closed loop system
- Trolley and turntable with external loading
- Fixed turntable inside blast chamber
- Automatic media concentration monitor
- Free standing hydro cyclone
- Fixed blast gun holder
- Wet cyclone media clarification
Images
Videos
