CC 103

Chem-Crest®
← Back to Cleaners & Degreasers

Industrial cleaning and degreasing

CC 103

Thoroughly removes oils, lubricants, particles, fingerprints, light silicone oils, mold release compounds, and airborne contaminants.

PurposeIndustrial cleaning and degreasing
Process fitSpray, immersion, ultrasonic or manual
SelectionApplication tested

Product overview

Built around the cleaning result

Disclaimer: All statements, technical information, and recommendations contained herein are based on tests or other information available to us, which we believe to be reliable, but the accuracy and completeness thereof is not guaranteed and are made without representation or warranty. They are presented for your own investigation and verification. Products discussed are sold without warranty, expressed or implied, in law or fact and upon the condition that the purchasers make their own tests to determine the suitability of such products to their particular purpose. We shall not be liable for any injury, loss, or damage direct or consequential, arising out of the use or the inability to use the product. It is the user’s obligation and responsibility to determine that any use of the product or the information may infringe on patent rights.

Process development

Specify chemistry and equipment together

Cleaning performance depends on the complete process: chemistry, concentration, temperature, time, mechanical action, filtration, rinsing, drying and bath maintenance.

eChem can review representative parts and soils, identify the right starting point, and help validate the process before it is released to production.

Current documentation

TDS and SDS review

Always confirm the latest technical and safety data before use. Availability, packaging and regulatory status can change.

Manufacturer reference: Crest Ultrasonics / Chem-Crest ↗

Application note: Final chemistry selection and operating parameters should be confirmed against the current TDS/SDS and tested on representative parts, soils and downstream requirements.

Build the right cleaning process

Share your materials, soils, throughput, equipment and cleanliness target. We’ll help narrow the chemistry and validate the process.

Start a Consultation