Industrial cleaning and degreasing
UC 834
Recommended 3-5% by volume. For tougher soils, concentration may be increased to 10% by volume.
Product overview
Built around the cleaning result
Ultra Clean C 834 is a highly alkaline liquid cleaner/degreaser used in spray washing or parts washers and cleaning systems for heavy-duty, general-purpose cleaning of most metal surfaces. Ultra Clean C 834 effectively cleans most soils encountered on metal surfaces. Ultra Clean C 834 contains wetting agents to enhance the natural cleaning ability of alkalis. Ultra Clean C 834 is not recommended for use on aluminum.
GENERAL INFORMATION: If additional cleaning power is needed, due to excessive soil conditions, a detergent/wetting agent may be added. Your representative will assist you in making this determination. Whenever a portion of the bath is lost from whatever cause, the working volume should be restored with the same proportion of CLEANER C 834 and water as used for a fresh bath. AFTER TREATMENT:
Following the cleaning stage, the work in process should be rinsed with water-heat as required up to 180° F. and depending on subsequent treatment to be used. Spray pressure should be 20 to 40 psi.
Process development
Specify chemistry and equipment together
Cleaning performance depends on the complete process: chemistry, concentration, temperature, time, mechanical action, filtration, rinsing, drying and bath maintenance.
eChem can review representative parts and soils, identify the right starting point, and help validate the process before it is released to production.
Current documentation
TDS and SDS review
Always confirm the latest technical and safety data before use. Availability, packaging and regulatory status can change.
Manufacturer reference: eChem application support ↗
Build the right cleaning process
Share your materials, soils, throughput, equipment and cleanliness target. We’ll help narrow the chemistry and validate the process.
Start a Consultation