UC KP 159

eChem Ultra Clean
← Back to Janitorial Chemistry

Water-soluble rust inhibition

UC KP 159

A water-soluble rust inhibitor that leaves a clear, dry, non-oily protective film on ferrous and aluminum surfaces.

Discuss Your ApplicationExplore Janitorial Chemistry
PurposeWater-soluble rust inhibition
Process fitSpray or immersion
SelectionSurface and task validated

Product overview

Built around the maintenance result

UC KP 159 can be applied to wet parts by spray or immersion and dries to a clear film without petroleum solvent, oil or wax.

The protective film is intended for process-stage or indoor protection and is designed not to interfere with dimensional gauging.

Application method

A clear, repeatable starting procedure

  1. Clean the parts and confirm the required protection interval.
  2. Prepare a 3–5% by-volume solution as a starting range.
  3. Apply at approximately 70–100°F by spray or immersion with complete coverage.
  4. Dry and verify corrosion protection and compatibility with the next operation.
Use note: Confirm the current label, TDS and SDS before use. Test compatibility in an inconspicuous area and train operators on dilution, PPE, dwell time, recovery and disposal.

Build the right corrosion-protection process

Share the material, prior cleaning step, handling conditions and required protection interval. We’ll help validate the concentration, application method and downstream compatibility.

Start a Consultation